Shopping Cart

Have a question?

Email or call us on 0207 729 9186

Earthquaker Devices Disaster Transport Sr Delay & Reverb

Product ID: P-11570

£339.00

Model Overview:

This is a dual delay with reverb and modulation, it sounds like a tape echo but is loaded with features so you're not limited in any way, particularly if you like chorus and flange - this pedal is capable of delivering those sounds in unity with the thick luscious delays and reverbs you'd expect.

Model Specs:

Controls

- Delay A Controls

  • Time- Controls the delay time from about 30ms up to 600ms.
  • Repeats- Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation. This can also be controlled via an expression pedal. The Moog EP-2 is recommended.
  • Mix- Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it’s above unity.
  • Depth- Controls the intensity of the modulation. From no modulation to all out seasick pitch bends.
  • Rate- Controls the rate of the modulation. The LED for delay A flashes in time with the modulation to visually show where the rate is set.
  • Bleed- This feeds delay A into delay B, post reverb (see block diagram for vi- sual explanation). Use this control for series or series/parallel operation to create rhythmic repeats, extra long delay time or an all out echo wash. This can also be controlled via an expression pedal. The Moog EP-2 is recommended. When using the bleed, experiment with the repeat controls on each delay line. Try using them in different settings, both together and individually, for different timing and textures.


- Delay B Controls

  • Reverb- Controls the amount of reverb added to the input of delay B.
  • Mix- Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it’s above unity.
  • Repeats- Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation.
  • Time- Controls the delay time from about 30ms up to 300ms.


- Switching

  • The switches for both delays switch the inputs only. The outputs are always connected. This allows you to have trails by always leaving the bypass switch engaged or to use the bypass switch as the master on/off for true bypass. Additionally, you can feed delay A in to delay B with the bleed control without having delay B switched on for a cleaner rhythmic delay.


Measurements

  • 5.5″ x 4.5″ x 2.5″ with knobs

 

Also by Earthquaker Devices

You’ve Just Seen